ATF/W Autoval Traffic Film Remover with Wax
To download this file as a Word Document click hereAutoval Traffic Film Remover
Product Code ATF/W
Product Description
A concentrated, heavy duty, cleaning fluid for use in high pressure cleaning machines. Designed to remove traffic film or degrease engines, chassis and components.
Directions
Normal working strength is 0.5 per cent at the final nozzle. For the greatest economy and safety, the detergent feed on the machine is adjusted to be just sufficient to give the required cleaning action. For most machines pre-dilute the traffic film remover with an equal volume of water. Keep contact with alkali sensitive materials to a minimum. Rinse the cleaned surface with water, not allowing the cleaning solution to dry on. Machine manufacturers recommend you run plain water through the machine after use.
Health and Safety
Irritant, contains sodium hydroxide (0.5-2.0%)
U.N. Number not applicable.
R36/38 Irritating to eyes and skin.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S2 Keep out of reach of children.
Produced by Morclean Jan 1998
PRODUCT SAFETY DATA SHEET
(1) IDENTIFICATION
Product Name: AUTOVAL TRAFFIC FRILM REMOVER & WAX
CODE: ATF/W
SUPPLIER: MORCLEAN (HEAD OFFICE & ACCOUNT)
Stephenson Road,
Speedwall Industrail Estate, STAVELEY, Chestersfield, England S43 3JN
Tel: (Chesterfield) 01246 471147
Fax (Admin & Sales): 01246 471247
Fax (Spares/Parts): 01246 270500
(2) COMPOSITION/INFORMATION ON INGREDIENTS
Sequestrant 2-5%
Sodium hydroxide 1-2%
Sodium silicates 0.5-2%
Anionic surfactant 1-5%
Nonionic surfactant 0-1%
(3) HAZARDS IDENTIFICATION
EYE CONTACT: Will cause severe irritation.
SKIN CONTACT: Will cause irritation.
CONTACT WITH RESPIRATORY SYSTEM: Not a hazard in normal use. Breathing fine mist may cause irritation.
FLAMMABILITY: Not combustible.
OTHER: Not applicable.
(4) FIRST AID MEASURES
EYE CONTACT: Immediately flush eyes with water, holding eyelids apart, for at least 10 minutes. Seek medical assistance at once.
SKIN CONTACT: Remove contaminated clothing. Wash skin with water and seek medical attention if irritation persists.
INHALATION: If fine mist is breathed remove to fresh air, keep warm and at rest. Seek medical attention immediately.
INGESTION: Do not induce vomiting. Give 200-300 ml of water to drink and seek medical assistance immediately.
(5) FIRE FIGHTING MEASURES Not applicable.
(6) ACCIDENTAL RELEASE
Take the necessary precautions to prevent contact. Shut off leaks if this can be done without personal risk. Contain the spillage if possible. Keep the area clear. Flush to foul sewer with a large quantity of water.
Observe Local Authority regulations.
(7) HANDLING & STORAGE
Store in a cool, dry place, protected from frost and away from acids and strong oxidising agents.
(8) EXPOSURE CONTROLS/PERSONAL PROTECTION
EYE PROTECTION: Chemical splash goggles.
HAND PROTECTION: Wear impervious gloves.
BODY PROTECTION: As necessary to prevent contact.
RESPIRATORY PROTECTION: Not a hazard in normal use. Avoid breathing spray.
OTHER PROTECTIVE MEASURES: Not applicable.
(9) PHYSICAL & CHEMICAL PROPERTIES
APPEARANCE: Pale Pink Liquid
ODOUR: Mild, characteristic.
pH 1% IN WATER (TYPICAL): 10.4
BOILING POINT: 100?C
MELTING POINT: Not applicable.
FLASH POINT: None.
AUTO-IGNITION TEMP: None.
EXPLOSIVE PROPERTIES: Not applicable.
OXIDISING PROPERTIES: None.
VAPOUR PRESSURE: 17.5 mm Hg at 20?C
RELATIVE DENSITY AT 20?C (TYPICAL): 1.052
SOLUBILITY: Miscible with water.
VISCOSITY: Free flowing.
(10) STABILITY AND REACTIVITY
HAZARDOUS REACTION: Incompatible with strong oxidising agents and acids.
HAZARDOUS DECOMPOSITION PRODUCTS: None known.
HAZARDOUS POLYMERISATION: Will not occur.
STABILITY: Stable.
(11) TOXICOLOGICAL INFORMATION
EYE CONTACT: Will cause severe irritation.
SKIN CONTACT: Will cause irritation.
INHALATION: Not a hazard in normal use. Breathing fine mist may cause irritation of the respiratory tract.
INGESTION: Moderate toxicity. Will cause severe irritation and damage to gastro-intestinal tract due to alkalinity.
LONG TERM: Based on current knowledge, no long term effects are anticipated if used correctly.
(12) ECOLOGICAL INFORMATION
Phosphate free. All organic ingredients are biodegradable when well diluted. Do not allow this product to enter water courses untreated.
(13) DISPOSAL
Consult national and local regulations.
Dilute well with water and dispose of in an approved and permitted biological treatment plant.
(14) TRANSPORT INFORMATION Not classified for transport.
(15) REGULATORY INFORMATION Irritant.
Occupational exposure limits: Sodium hydroxide 2mt/M?
OES 10 minute STEL
(16) OTHER INFORMATION
It is for users to satisfy themselves of the suitability of this product for their own applications.
This information is believed to be accurate at the time of printing and is given in good faith.
Produced by Morclean WPD6 'atf/w' rc 6.1
Date of issue: 20Jan 1998