Disinfecting platforms
The Morclean disinfectant platform is a standard Morclean platform surface mounted with access via 5-metre long entry & exit ramps with an option to inset the platform into a prepared foundation.| Specification | |
| 4 metres wash platform 2.4 metres galvanised side screens Combination 4 metres header tank/ pump house Fully automatic control panel, PLC | Inverter 15kW wash pump Vehicle sensors Connecting pipe work All cabling |
The wash would be supplied from a combination tank, acting as a pump house, header and recycling tank. The recycling and header tank will hold a total of 11,000 litres, top up water to the header tank will be continually dosed with fresh chemical.
The pump house would also house a “Dosatron” proportional liquid dispenser which will add a non corrosive chemical such as ‘Virkon S’ to mains water being delivered to the header tank also a small captive sump, located underneath the wash platform, will house a submersible pump, which will immediately remove and transfer spent wash water back to the recycling tank. A facility to house the chemical container will be provided for within the pump house.
Mains water will be connected to the header tank and called for on demand via float switch and solenoid in the header tank.
It is essential to ensure that the volume of chemical added is sufficient to maintain its effective activity in the system. As vehicles are washed and disinfected there will be a natural waste of liquid by evaporation and carry off.
The main wash pump detailed will deliver up to 1000 litres per minute at a pressure of up to 3 bar (60psi) at the nozzle. Pressure and volume can be adjusted via the variable speed inverter driving the main pump, to provide the optimum spray pattern required for site. Varying the quantity of nozzles used and, or the nozzle aperture can provide for further adjustment if necessary. Both variables are easily controlled when the system is installed.
It will be possible to vary the pressure of the wash and to also personalise that pressure dependent on direction of entry.
Upcoming nozzles will direct spray at the wheels and chassis of the vehicle only and nothing above that. An additional spray race will be fitted at 1000mm, angled downwards to direct spray at the vehicle wheels and sidewalls.
Periodic emptying of the recycling tank for removal of settled solids will be necessary via 4”/6” Bauer connectors and vacuum tanker.
Morclean is not like other types of wheel wash system because a number of unique features have been engineered into its design. These include:
Inverter-driven pumps- fitted as standard. This minimises the amount of power required at start up, (max. 15kW). The inverter allows Morclean total flexibility of the wash pressure, delivering significant cost savings (approx 50%).
Please contact us for advice on specific projects and innovative design challenges.
T: Freephone 0800 1300 402 Email: Click Here